InkBird ITC-308 Plug & Play Temperature Controller

Features: 
Plug and play design, easy to use
Dual relay output, be able to connect with refrigeration and heating equipment at the same time; 
Support reading with Centigrade or Fahrenheit unit; 
Maximum output load: 1100W(110V); 
Dual display window, be able to display measured temperature and set temperature at the same time; 
Compressor delay protection for refrigeration control 
High and low temperature alarms are available 
Over-temperature and sensor fault alarm 
Temperature calibration
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. 

Specification 
Temperature Control Range : -60~120 °C / -58~248 ° F 
Temperature Resolution: 0.1 ° C / 0.1° F Temperature 
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) 
Temperature Control Mode :On/Off Control, Heating and Cooling 
Input Power: 100 ~240VAC, 50Hz/60Hz 
Temperature Control Output: Max. 10A, 100V ~240V AC 
Buzzer Alarm: High and Low Temperature Alarm 
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch) 
Socket: 85x42x24mm(3.3x1.7x1inch) 
Sensor Type: NTC sensor (Including) 
Sensor Length: 2m / 6.56ft 
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F 
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F 
Humidity 20~85% (No Condensate) 


Package Content: 
1x ITC 308S Temperature Controller; 
1x 6.65ft DC Cord NTC Sensor 
1x Manual